easytherm-60_01_400x400
Induction Heater Intelligent Electronic UnitInduction Heater LiftInduction Heater Trolley5

Easytherm 60

Workflow advantages

  • Fast controllable heating process
  • Safe heating process; only the work piece is heated
  • Elimination of hot oil bath, no risk of localized overheating
  • Suitable for sealed and shielded bearings
  • Suitable for pre-greased bearings
  • Suitable for bearings with polyamide cage

Product Description

The Easytherm 60 is robust a powerful 460 Volt stationary microprocessor controlled induction heater to be used for the professional mounting of heavy bearings and couplings etc. in maintenance shops and production areas for instance paper-mills and steel-mills.

 

Specifications

Voltage380 – 480 Vac
Frequency50 / 60Hz
Power25 kVA
Weight heater350 kg / 771 lbs
Dimensions heater lxbxh780 x 1200 x 1060 mm
Max. temperature240°C / 464°F
Max. diameter work piece900 mm
Max. width Work piece410 mm
Max. weight Work piece700 kg

 

Size induction yokes (mm / inch)Min. bore part (A)Max. outer diameter part (B)Max. width part (C)Max. weight part
26 x 30 x 700 /
1.00 x 1.20 x 27.55
45 mm /
1.6”
830 mm /
32.68”
410 mm /
16.14”
700 kg /
1543 lbs
38 x 40 x 700 /
1.50 x 1.60 x 27.55
55 mm /
2.2”
840 mm /
33.07”
410 mm /
16.14”
700 kg /
1543 lbs
48 x 50 x 700 /
1.90 x 2.00 x 27.55
70 mm /
2.75”
850 mm /
33.46”
410 mm /
16.14”
700 kg /
1543 lbs
60 x 60 x 700 /
2.40 x 2.40 x 27.55
85 mm /
3.35”
860 mm /
33.86”
410 mm /
16.14”
700 kg /
1543 lbs
70 x 70 x 700 /
2.80 x 2.80 x 27.55
100 mm /
3.95”
870 mm /
34.25”
410 mm /
16.14”
700 kg /
1543 lbs
80 x 80 x 700 /
3.15 x 3.15 x 27.55
115 mm /
4.55”
880 mm /
34.65”
410 mm /
16.14”
700 kg /
1543 lbs
90 x 90 x 700 /
3.55 x 3.55 x 27.55
130 mm /
5.1”
890 mm /
35.04”
410 mm /
16.14”
700 kg /
1543 lbs
100 x 100 x 700 /
3.95 x 3.95 x 27.55
145 mm /
5.7”
900 mm /
35.43”
410 mm /
16.14”
700 kg /
1543 lbs
* Other measurements on request

OPTIONAL PARTS
for Easytherm 60 and  100

Lifting device

The lifting device makes it possible to lift the heavier induction yokes. With this device an external elevating crane is not needed.

Trolley

With the trolley the Easytherm 60 and 100 can be assembled easily to   a movable model. The large robust castors make it movable and allow the unit to be used where needed.

Hoist attachment points

The 4 hoist attachment points make it easier to move the heater with a crane in the factory.

Reviews

There are no reviews yet.

Be the first to review “Easytherm 60”

Your email address will not be published. Required fields are marked *