easytherm-250_01_400x400

Easytherm 250

Workflow advantages

  • Fast controllable heating process
  • Safe heating process; only the work piece is heated
  • Elimination of hot oil bath, no risk of localized overheating
  • Suitable for sealed and shielded bearings
  • Suitable for pre-greased bearings
  • Suitable for bearings with polyamide cage

Product Description

The Easytherm 250 is a very robust and powerful 460 Volt stationary microprocessor controlled induction heater to be used for the professional mounting of heavy parts including bearings up to 2500 kg, typically used in maintenance shops and production areas for instance gearbox manufacturers. When press mounting is not an option the EasyTherm 250 offers the solution.

 

Specifications

Voltage380-600 V
Frequency50/60 Hz
Power250 A / 100 kVA
Weight heater1800 kg / 3968 lbs
Dimensions heater lxbxh1500 x 3000 x 2000 mm
Max. temperature240 °C / 464°F
Max. diameter work piece2000 mm
Max. width Work piece620 mm
Max. weight Work piece3000 kg / 6613 lbs

 

Size induction yokes (mm / inch)Min. bore part (A)Max. outer diameter part (B)Max. width part (C)Max. weight part
100x100x1250 / 3.94×3.94×49.21145mm /
5.71”
2000mm /
78.74”
620mm /
24.41”
3000 kg /
6613 lbs
150x150x1250 / 5.91×5.91×49.21215mm /
8.46”
2000mm /
78.74”
620mm /
24.41”
3000 kg /
6613 lbs
200x200x1250 / 7.87×7.87×49.21284mm /
11.18”
2000mm /
78.74”
620mm /
24.41”
3000 kg /
6613 lbs
* Other measurements on request

Reviews

There are no reviews yet.

Be the first to review “Easytherm 250”

Your email address will not be published. Required fields are marked *