easytherm-100_01_400x400
Induction Heater Intelligent Electronic UnitInduction Heater LiftInduction Heater Trolley5

Easytherm 100

Workflow advantages

  • Fast controllable heating process
  • Safe heating process; only the work piece is heated
  • Elimination of hot oil bath, no risk of localized overheating
  • Suitable for sealed and shielded bearings
  • Suitable for pre-greased bearings
  • Suitable for bearings with polyamide cage

Product Description

The Easytherm 100 is robust and a powerful 460 Volt stationary microprocessor controlled induction heater. To be used for the professional mounting of a range of heavy parts including bearings, typically in maintenance shops and production areas for instance paper-mills and steel-mills. When press mounting is not an option the TM heater offers the solution.

 

Specifications

Voltage380-575 V
Frequency50/60 Hz
Power40 kVA
Weight heater800 kg / 1763 lbs
Dimensions heater lxbxh1200 x 1700 x 1250 mm
Max. temperature240°C / 464°F
Max. diameter work piece1500 mm
Max. width Work piece460 mm
Max. weight Work piece1250 kg / 2755 lbs

 

Size induction yokes (mm / inch)Min. bore part (A)Max. outer diameter part (B)Max. width part (C)Max. weight part
60 x 60 x 850 /
2.40 x 2.40 x 33.45
85 mm /
3.35”
1500 mm /
59.06”
470 mm /
18.50”
1250 kg /
2755 lbs
80 x 80 x 850 /
3.15 x 3.15 x 33.45
115 mm /
4.55”
1500 mm /
59.06”
470 mm /
18.50”
1250 kg /
2755 lbs
100 x 100 x 850 /
3.95 x 3.95 x 33.45
145 mm /
5.7”
1500 mm /
59.06”
470 mm /
18.50”
1250 kg /
2755 lbs
150 x 150 x 850 /
5.90 x 5.90 x 33.45
215 mm /
8.45”
1500 mm /
59.06”
470 mm /
18.50”
1250 kg /
2755 lbs
* Other measurements on request

OPTIONAL PARTS
for Easytherm 60 and  100

Lifting device

The lifting device makes it possible to lift the heavier induction yokes. With this device an external elevating crane is not needed.

Trolley

With the trolley the Easytherm 60 and 100 can be assembled easily to   a movable model. The large robust castors make it movable and allow the unit to be used where needed.

Hoist attachment points

The 4 hoist attachment points make it easier to move the heater with a crane in the factory.

Reviews

There are no reviews yet.

Be the first to review “Easytherm 100”

Your email address will not be published. Required fields are marked *